RCS file: ./RCS/README.pod,v
2001-02-28 15:50:17-06
revision 1.10
updated copyright

updated thanks and contributors

added "FlowScan Resources"

removed Napster section
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2001-02-28 15:48:08-06
revision 1.23
updated copyright date
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2001-02-28 15:31:26-06
revision 1.22
various updates in prep for release
================================================================================
RCS file: ./RCS/TODO,v
2001-02-28 15:31:17-06
revision 1.19
various updates
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-28 15:31:02-06
revision 1.63
updated some BGPDumpFile info
================================================================================
RCS file: ./RCS/VERSION,v
2001-02-28 15:27:47-06
revision 1.6	locked by: dplonka;
prep for release
================================================================================
RCS file: ./RCS/README.pod,v
2001-02-28 15:27:04-06
revision 1.9
various updates in prep for release
================================================================================
RCS file: ./rc/solaris/RCS/flowscan,v
2001-02-28 15:26:12-06
revision 1.2
fixed a bug in the previous revision which caused the configuration files
and modules not to be found if relative paths were used

updated bindir to not refer to my home directory
================================================================================
RCS file: ./rc/linux/RCS/flowscan,v
2001-02-28 15:22:22-06
revision 1.4
fixed a bug in the previous revision which caused the configuration files
and modules not to be found if relative paths were used
================================================================================
RCS file: ./rc/linux/RCS/flowscan,v
2001-02-28 14:56:30-06
revision 1.3
updated bindir to not refer to my home directory
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2001-02-28 14:17:40-06
revision 1.27
fixed a typo
================================================================================
RCS file: ./RCS/flowscan.in,v
2001-02-16 15:17:26-06
revision 1.20
updated copyright date
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2001-02-16 15:16:41-06
revision 1.26
be sure we have Net::Patricia 1.010 which has a bug fix
(Feb 13)
================================================================================
RCS file: ./RCS/configure.in,v
2001-02-16 15:16:41-06
revision 1.13
be sure we have Net::Patricia 1.010 which has a bug fix
(Feb 13)
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2001-02-14 15:52:39-06
revision 1.24
fixed some typos and whitespace in the previous revision(s)
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2001-02-13 15:12:34-06
revision 1.21
various updates in prep for the 1.006 release
================================================================================
RCS file: ./RCS/TODO,v
2001-02-13 14:44:10-06
revision 1.18
*** empty log message ***
================================================================================
RCS file: ./RCS/Makefile.in,v
2001-02-13 13:24:41-06
revision 1.15
added example/events.txt
================================================================================
RCS file: ./example/RCS/events.txt,v
2001-02-13 13:24:22-06
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2001-02-13 13:06:24-06
revision 1.25
POD
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-13 13:06:24-06
revision 1.62
POD
================================================================================
RCS file: ./RCS/README.pod,v
2001-02-13 13:05:49-06
revision 1.8
prepped for 1.006 release
================================================================================
RCS file: ./RCS/Makefile.in,v
2001-02-13 13:04:52-06
revision 1.14
added CampusIO and SubNetIO POD-based documentation to the distribution
================================================================================
RCS file: ./RCS/TODO,v
2001-02-13 13:04:29-06
revision 1.17
*** empty log message ***
================================================================================
RCS file: ./cf/RCS/CampusIO.cf,v
2001-02-13 13:04:05-06
revision 1.13
updated default NapsterPorts to what I've been using
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-13 07:32:37-06
revision 1.61
handled ASN ranges in ASNFile
================================================================================
RCS file: ./RCS/Makefile.in,v
2001-02-13 07:22:37-06
revision 1.13
installed ip2hostname
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-12 22:52:24-06
revision 1.60
fixed a typo that caused the BGPDumpFile and ASNFile to be reloaded
even though it hadn't been modified
================================================================================
RCS file: ./RCS/TODO,v
2001-02-12 22:48:44-06
revision 1.16
*** empty log message ***
================================================================================
RCS file: ./RCS/Makefile.in,v
2001-02-12 22:45:48-06
revision 1.12
added ip2hostname
================================================================================
RCS file: ./RCS/configure.in,v
2001-02-12 22:45:48-06
revision 1.12
added ip2hostname
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2001-02-12 22:36:41-06
revision 1.24
restored initialization of TopN which I had apparently removed inadvertently
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-12 22:35:34-06
revision 1.59
added ASNFile stuff

stored rrdtime as a public member of the object

fixed a divide-by-zero error by introducing the percent sub
================================================================================
RCS file: ./cf/RCS/CampusIO.cf,v
2001-02-12 22:09:23-06
revision 1.12
added ASNFile directive
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-12 21:21:59-06
revision 1.58
reload BGPDumpFile if the modification time changes
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-12 20:25:05-06
revision 1.57
fixed HTML AS reports to use scaling and use timestamp of most recent
RRD update
================================================================================
RCS file: ./RCS/Makefile.in,v
2001-02-12 16:24:08-06
revision 1.11
added event2vrule utility
================================================================================
RCS file: ./RCS/TODO,v
2001-02-12 16:23:40-06
revision 1.15
*** empty log message ***
================================================================================
RCS file: ./util/RCS/event2vrule.in,v
2001-02-12 16:23:11-06
revision 1.2
used configure output variable for PERL_PATH
================================================================================
RCS file: ./cf/RCS/CampusIO.cf,v
2001-02-12 16:21:48-06
revision 1.11
added WebProxyIfIndex directive

fixed up some documentation regarding other directives
================================================================================
RCS file: ./cf/RCS/SubNetIO.cf,v
2001-02-12 16:21:06-06
revision 1.4
added new Top Talkers directives
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2001-02-12 16:00:57-06
revision 1.23
added "organization" and "events" Makefile variables
================================================================================
RCS file: ./RCS/configure.in,v
2001-02-12 16:00:09-06
revision 1.11
added event2vrule to distribution
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-12 15:20:58-06
revision 1.56
fixed a typo in the HTML AS reports
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-12 15:17:20-06
revision 1.55
added support for WebProxyIfIndex so that users can specify an interface
to which HTTP traffic is being sent via a route-map

fixed a bug in which we would try to calculate log(0) when TopN is defined

added some POD for BGPDumpFile
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-12 13:26:53-06
revision 1.54
added percentages to HTML Top Talker reports

used the RRD timestamp rather than the raw flow file timestamp in the
name of the HTML Top Talker reports
(This facilitates having them overwrite each other daily and such.)
================================================================================
RCS file: ./cf/RCS/CampusIO.cf,v
2001-02-12 13:09:21-06
revision 1.10
cleaned up a bit
(Jan 21)
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2001-02-12 11:10:02-06
revision 1.23
this module no longer uses HTML::Table directly
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-12 11:09:37-06
revision 1.53
added tx and rx to "total.rrd"
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-11 16:33:12-06
revision 1.52
changed format of HTML Top Talker reports

added tx and rx to "total.rrd"
================================================================================
RCS file: ./util/RCS/add_txrx.in,v
2001-02-11 14:43:25-06
revision 1.2
converted to use configure output variables
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2001-02-11 14:42:15-06
revision 1.22
integrated the user/host Data Sources into the same RRD as the bytes,
pkts, and flows Data Sources.  (Previously they were being written
to seperate "_users.rrd" files.)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-11 14:42:15-06
revision 1.51
integrated the user/host Data Sources into the same RRD as the bytes,
pkts, and flows Data Sources.  (Previously they were being written
to seperate "_users.rrd" files.)
================================================================================
RCS file: ./RCS/FlowScan.pm,v
2001-02-11 14:41:19-06
revision 1.5
changed createGeneralRRD so that the DS type can be specified differently
for each DS name
================================================================================
RCS file: ./RCS/Makefile.in,v
2001-02-11 14:40:40-06
revision 1.10
added stuff for add_txrx
================================================================================
RCS file: ./RCS/configure.in,v
2001-02-11 14:40:23-06
revision 1.10
added stuff for add_txrx
================================================================================
RCS file: ./util/RCS/README.add_ds,v
2001-02-11 11:16:50-06
revision 1.1
Initial revision
================================================================================
RCS file: ./util/RCS/add_ds.pl.in,v
2001-02-11 11:16:18-06
revision 1.1
Initial revision
================================================================================
RCS file: ./util/RCS/add_txrx.in,v
2001-02-11 10:55:55-06
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/TODO,v
2001-02-10 16:00:06-06
revision 1.14
*** empty log message ***
================================================================================
RCS file: ./RCS/FlowScan.pm,v
2001-02-10 15:46:43-06
revision 1.4
moved createGeneralRRD method from SubNetIO to here so that it can be
used by other derived classes such as CampusIO
(Feb  8)
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2001-02-10 15:37:32-06
revision 1.22
added support for events
================================================================================
RCS file: ./util/RCS/event2vrule.in,v
2001-02-08 21:20:36-06
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/configure.in,v
2001-02-08 17:28:57-06
revision 1.9
added check for HTML::Table
(Jan 25)
================================================================================
RCS file: ./RCS/flowscan.in,v
2001-02-08 17:28:27-06
revision 1.19
made $class mine
================================================================================
RCS file: ./rc/linux/RCS/flowscan,v
2001-02-08 17:27:09-06
revision 1.2
removed unused flowfileglob variable
Gregory Goddard <gregg@nersp.nerdc.ufl.edu> reminded me that its
presence was confusing
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2001-02-08 17:25:11-06
revision 1.21
moved createGeneralRRD sub from here to FlowScan.pm so that it could be
used by both this class and by CampusIO.
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2001-02-08 17:12:39-06
revision 1.50
removed MRTG rateup stuff
using rateup to maintain ".log" files is no longer supported

added "Top Talkers" HTML table reports by network

added support for LFAP (RiverStone Lightweight Flow Accounting Protocol)
This currently requires the slate package from http://www.nmops.org and
the slate2cflow patch by Steven Premeau <premeau@uwp.edu>, which causes
the slate sfas daemon to produce raw flow files in cflowd's raw file
format for v5 NetFlow.

added the ability to identify outbound traffic based solely on the flow's
destination IP address.  Previously NextHops or OutputIfIndexes was
required.  Now, the default is to use consider a flow to be outbound
if it's destination address is not a known local IP address.
Still, performance-wise and to avoid miscounting forged source traffic
it is preferable to use NextHops or OutputIfIndexes if possible.

Added the reporting of the total number of local addresses that have
transmitted (tx) or received (rx) flows to an RRD named "_users".
This will allow us to graph the number of active hosts over time,
and to calculate average flow counts and rates.
================================================================================
RCS file: ./RCS/flowscan.in,v
2001-02-08 11:51:50-06
revision 1.18
did eval "use ..." rather than require and import
================================================================================
RCS file: ./RCS/TODO,v
2001-02-08 10:35:40-06
revision 1.13
*** empty log message ***
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2001-02-08 09:43:18-06
revision 1.20
die unless the run-time "use HTML::Table" worked
(Jan 21)
================================================================================
RCS file: ./cf/RCS/Napster_subnets.boulder,v
2001-01-21 14:36:16-06
revision 1.4
restored 208.* subnets since I found that Napster resumed use of
208.184.216.* sometime this month
================================================================================
RCS file: ./cf/RCS/CampusIO.cf,v
2000-10-30 11:16:35-06
revision 1.9
added the BGPDumpFile, TopN, and ReportPrefixFormat directives
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-10-30 11:08:49-06
revision 1.49
added POD about CampusIO.cf options

fixed a problem which required that NapsterSubnetFiles be defined
if you wanted to save flows of various application types that were
unrelated to Napster, such as ftpPASV and other.
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2000-10-26 11:15:29-05
revision 1.19
added call to mkdirs_as_necessary so that users can put sub-directory
specifications when using the ReportPrefixFormat config file directive
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-10-26 11:10:03-05
revision 1.48
added call to mkdirs_as_necessary so that users can put sub-directory
specifications when using the ReportPrefixFormat config file directive
================================================================================
RCS file: ./RCS/FlowScan.pm,v
2000-10-26 11:08:46-05
revision 1.3
added mkdirs_as_necessary method for use by CampusIO, SubNetIO, etc.
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-10-25 14:34:47-05
revision 1.47
added originAS reporting that I wrote 2000/10/20

added pathAS reporting

these required the introduction of the BGPDumpFile, TopN, and
ReportPrefixFormat configuration directives
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2000-10-25 14:33:25-05
revision 1.18
added ReportPrefixFormat configuration directive
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-10-24 08:02:45-05
revision 1.46
fixed a bug in the previous revision (which was in the FlowScan-1.005
release) which caused flowscan to abort or die if one configured
NextHops or LocalNextHops by name rather than IP.
When using Net-Patricia-1.008, it would abort with this error:

   perl: patricia.c:645: patricia_lookup: Assertion `prefix' failed.

and using Net-Patricia-1.009, it would die with this error:

   invalid key at CampusIO.pm line 103.
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2000-10-20 22:39:11-05
revision 1.17
added TopN config file directive and produced HTML tables if set
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2000-10-20 17:40:03-05
revision 1.16
added reporting of top talkers/listeners
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2000-10-20 16:26:16-05
revision 1.15
added counting of the number of active src and dst IP addresses
(these totals are reported in "n.n.n.n_users.rrd" files)
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-10-19 14:26:10-05
revision 1.21
fixed a bug in the previous revision regarding the graphs of
Real pkts and flows
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-10-19 13:43:27-05
revision 1.20
renamed Net::PatriciaTrie to Net::Patricia

added UDPServices info

improved "Upgrading" instructions a bit
================================================================================
RCS file: ./RCS/README.pod,v
2000-10-19 13:42:43-05
revision 1.7
renamed Net::PatriciaTrie to Net::Patricia

added info about UDPServices

added Contributors
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-10-19 13:42:05-05
revision 1.20
added "tag=_tagval" command line option

added usage examples

shortened titles a bit so that they are more likely to fit when width
is reduced from default
================================================================================
RCS file: ./RCS/TODO,v
2000-10-19 12:53:17-05
revision 1.12
added reminder about new AS report.
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-10-19 12:01:09-05
revision 1.19
added "io_services_pkts" graph

removed old endeavor graph
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-10-19 11:37:15-05
revision 1.18
added "io_services_flows" graph
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-10-19 10:25:44-05
revision 1.17
added "io_protocols_bits" graph and tweaked the legends in the other
"io_protocols" graphs a bit
================================================================================
RCS file: ./cf/RCS/CampusIO.cf,v
2000-10-18 16:10:57-05
revision 1.8
added UDPServices based on suggestion/sample code from
John Payne <john@sackheads.org>
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-10-18 16:10:57-05
revision 1.45
added UDPServices based on suggestion/sample code from
John Payne <john@sackheads.org>

renamed Net::PatriciaTrie to Net::Patricia

fixed some of the configuration file directives that were unnecessarily
being marked as "requruired" previously
================================================================================
RCS file: ./RCS/TODO,v
2000-10-18 16:10:19-05
revision 1.11
took out a bunch of things that are done
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2000-10-18 16:03:02-05
revision 1.14
renamed Net::PatriciaTrie to Net::Patricia
================================================================================
RCS file: ./RCS/configure.in,v
2000-10-18 15:57:24-05
revision 1.8
renamed Net::PatriciaTrie to Net::Patricia
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-10-12 00:57:14-05
revision 1.19
updated upgrade docs in prep for 1.005 release

clarified instructions in "Testing FlowScan" section so that users know
which directory they should be in when launching flowscan

updated usage info for "graphs.mf" now that it has new variables that
may be passed on the make(1) command line
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-10-12 00:52:53-05
revision 1.44
reorganized the code that identifies the service or application for
each flow in the wanted method.  This was required to implement a
new feature in which unidentified flows will be written to time-stamped
raw flow files in the "saved/other" directory if that dir exists.
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2000-10-12 00:51:20-05
revision 1.13
switched to using the climb method now that it seems to be working
properly in Net::PatriciaTrie 1.006.
================================================================================
RCS file: ./RCS/README.pod,v
2000-10-12 00:50:59-05
revision 1.6
prepped for 1.005 release
================================================================================
RCS file: ./RCS/TODO,v
2000-10-05 20:45:43-05
revision 1.10
added RealServerPurge routine to periodically purge the hash of hosts
thought to be Real servers, so that it doesn't grow without bound.
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-10-05 20:45:43-05
revision 1.43
added RealServerPurge routine to periodically purge the hash of hosts
thought to be Real servers, so that it doesn't grow without bound.
================================================================================
RCS file: ./cf/RCS/flowscan.cf,v
2000-10-05 20:40:40-05
revision 1.3
changed default WaitSeconds to 30
================================================================================
RCS file: ./RCS/VERSION,v
2000-10-05 20:33:43-05
revision 1.5
*** empty log message ***
================================================================================
RCS file: ./RCS/TODO,v
2000-10-05 20:07:05-05
revision 1.9
Michael requested an enhancement to have "other" or "unidentified" flows
saved to their own raw flow files to aid in investigating how to
identify more traffic
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-10-05 20:04:00-05
revision 1.18
removed installation info for perl modules which are no longer required
now that CampusIO and SubNetIO are using Net::PatriciaTrie exclusively
================================================================================
RCS file: ./RCS/configure.in,v
2000-10-05 20:00:06-05
revision 1.7
NetTree and NetTrie are no longer required now that all lookups use
Net::PatriciaTrie
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2000-10-05 19:59:04-05
revision 1.12
switched to using Net::PatriciaTrie exclusively for all address-based
lookups.  NetTree and NetTrie are no longer required.
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-10-05 19:59:04-05
revision 1.42
switched to using Net::PatriciaTrie exclusively for all address-based
lookups.  NetTree and NetTrie are no longer required.
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-09-28 21:26:04-05
revision 1.17
added Net::PatriciaTrie to perl modules under "Software Requirements"
================================================================================
RCS file: ./RCS/TODO,v
2000-09-28 21:23:23-05
revision 1.8
reorganized to move high pri stuff to top
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-09-28 21:22:12-05
revision 1.16
various changes to install docs to accommodate cflowd-2-1-a9, etc.
================================================================================
RCS file: ./RCS/configure.in,v
2000-09-28 21:21:30-05
revision 1.6
added test for patricia module
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2000-09-28 21:19:31-05
revision 1.11
renamed patricia module to Net::PatriciaTrie
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-09-28 21:19:31-05
revision 1.41
renamed patricia module to Net::PatriciaTrie
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-09-28 21:16:27-05
revision 1.40
switched to using the Patricia trie when testing for Napster subnets
(this was overlooked in the previous revision)
(Sep 23)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-09-23 16:35:32-05
revision 1.39
used PatriciaTrie (rather than NetTree and NetTrie) for performance
(this also avoids the inet_ntoa/inet_addr conversion)

Also, used PatriciaTrie (rather than grep-based sequential search) for
NextHops to identify outbound traffic
(this should improve performance especially for users with "many"
NextHops)
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2000-09-23 16:34:09-05
revision 1.10
used PatriciaTrie rather than NetTrie for performance reasons
(this also avoids the inet_ntoa/inet_addr conversion)
================================================================================
RCS file: ./RCS/configure.in,v
2000-09-23 13:10:01-05
revision 1.5
checked that Cflow is installed
(Sep 22)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-09-22 10:04:17-05
revision 1.38
require Cflow >= 1.024 since changes introduced in earlier revisions
(such as 1.36) require it (for TCP flag values, etc.)
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-09-22 08:05:03-05
revision 1.16
added http_src in and out macros which were missing from the previous
revision (?)

added "io_protocols" graphs to "io" target
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-09-21 22:02:54-05
revision 1.15
added "io_protocols_pkts" and "io_protocols_flows" graphs
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-09-17 18:21:01-05
revision 1.14
corrected usage info
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-09-17 18:05:16-05
revision 1.13
changed default file type to png
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-09-17 18:03:38-05
revision 1.12
added usage info
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-09-17 17:59:48-05
revision 1.11
renamed "pc" graphs to "io" graphs ('i'nbound/'o'utbound)

changed color of horizontal rule at zero on io_services_bits graph to
match the background color
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-09-17 15:16:57-05
revision 1.10
changed "pc_services_bits" graph a bit to make the legend less verbose

added "filetype" make variable so that it is easier to specify what
file extension ("gif" or "png") should be produced.
(This variable also affects whether or not "GIF" or "PNG" is passed to
rrdtool graph with the "--imgformat" option.)
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-09-17 14:50:48-05
revision 1.9
added "pc_services_bits.gif" target based on example from
Alexander Kunz <Alexander.Kunz@nextra.de>
================================================================================
RCS file: ./RCS/VERSION,v
2000-09-15 14:05:07-05
revision 1.4
*** empty log message ***
================================================================================
RCS file: ./RCS/README.pod,v
2000-09-15 13:37:37-05
revision 1.5
added changes for FlowScan-1.003

added URL of flow size stuff
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-09-15 13:35:46-05
revision 1.15
added sections about the mailing list and about upgrading

various other changes in prep for release
================================================================================
RCS file: ./RCS/flowscan.in,v
2000-09-15 13:33:35-05
revision 1.17
fixed a bug introduced in revision 1.15 when I added the "-s bytes"
option suggested by Gregory Goddard <gregg@nersp.nerdc.ufl.edu>
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-09-14 16:12:41-05
revision 1.14
updated install steps for Boulder, ConfigReader, and Cflow stuff

added reminder that you must configure your Cisco(s) to have
"ip route-cache flow" enabled on one or more interfaces!
Suggested by Mark Roedel <roedelm@letu.edu>
================================================================================
RCS file: ./RCS/flowscan.in,v
2000-09-14 15:59:54-05
revision 1.16
fixed a typo in a message introduced in the previous revision
================================================================================
RCS file: ./example/RCS/crontab.in,v
2000-09-14 15:55:07-05
revision 1.2
fixed some typos in the previous example (the reference to XARGS_PATH
was hosed previously)

Apr 21
================================================================================
RCS file: ./cf/RCS/Napster_subnets.boulder,v
2000-09-14 15:19:37-05
revision 1.3
updated Napster subnets since 2000/09/08, at about 3AM (CDT) Napster.com
moved to 64.124.0.0/16 (AboveNET)
(also prep for 1.003 release)
================================================================================
RCS file: ./RCS/flowscan.in,v
2000-09-08 13:50:31-05
revision 1.15
added "-s bytes" option to have flowscan skip processing files greater than
a specified size
================================================================================
RCS file: ./RCS/TODO,v
2000-08-18 21:13:25-05
revision 1.7
added yet-another item
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-08-18 21:11:10-05
revision 1.8
changed floating point format to %.1lf for readability
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-08-16 11:31:34-05
revision 1.7
added PASV mode ftp traffic to the various "services" graphs.
(It is combined with "ftp-data".)
================================================================================
RCS file: ./RCS/configure.in,v
2000-08-16 11:30:19-05
revision 1.4
verify that ksh is installed

verify that the 80/tcp service is named "http"
================================================================================
RCS file: ./RCS/TODO,v
2000-08-16 11:29:40-05
revision 1.6
various additions
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2000-08-16 09:51:18-05
revision 1.9
updated copyright date
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-08-16 09:42:21-05
revision 1.37
updated some comments
================================================================================
RCS file: ./cf/RCS/CampusIO.cf,v
2000-08-09 14:07:36-05
revision 1.7
fixed up a comment about LocalNextHops
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-08-08 16:11:16-05
revision 1.36
added the identification and counting of PASV-mode ftp data as
ftpPASV_src and ftpPASV_dst.  'src' and 'dst' refers to whether the
traffic traveled from the machine which has the TCP port 21 control/
command endpoint, or from to that machine, respectively.  Ie.
ftpPASV_src should represent data from ftp servers, and ftpPASV_dst
should represent data from ftp clients to ftp servers.

Changed Napster stuff to be sure that the ACK flag is set when we
observe traffic which appears to involve a NapServer.  This is to
safeguard this code from mistakenly thinking that a user is an
active NapUser solely because they've sent a packet to a Napster
server/subnet (which may or may not answer depending upon how
Napster.com fairs with the courts, for instance).
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-08-02 02:51:19-05
revision 1.35
Added the saving of NapUserMaybe flows to a raw flow file if the
"saved/NapUserMaybe" dir exists.  (In the previous revision there was
just one named "NapUser" and NapUserMaybe flows would go there as well.)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-07-29 22:11:12-05
revision 1.34
Bug fix to the change made in the previous revision for compatibility
with the current Boulder stuff.  The previouis revision was broken.

Added the saving of NapUser flows to a raw flow file if the "saved/NapUser"
directory exists.  (This is mostly to aid in doing subsequent research
and testing of Napster flow identification methods.)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-07-29 15:31:43-05
revision 1.33
skip Napster processing if no NapsterSubnetFiles are defined or found
(I apparently attempted to do this in revision 1.x, but it was incorrect...
for instance NapsterCachePurge was still getting called regardless of
whether or not Napster directives appeared in CampusIO.cf.)

Fixed compatibility with the current Boulder stuff, e.g. Stone version 1.18.
Previously flowscan users would get "not an array reference at line n of
Stone.pm" when they used a current version of Stone.pm, and were having
to use a very old distribution, "boulder.tar.gz", rather than the current
stuff from CPAN.
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-05-11 15:46:29-05
revision 1.13
various updates and hints added in preparation for next release
================================================================================
RCS file: ./RCS/TODO,v
2000-05-11 15:45:37-05
revision 1.5
removed item re: handling deactivation of Daylight-Savings-Time,
now that it's fixed
================================================================================
RCS file: ./RCS/TODO,v
2000-05-11 15:41:17-05
revision 1.4
added another item re: making "--step" configurable
(May 10)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-05-11 15:37:38-05
revision 1.32
added the initialization of totals for services so that their RRD files
will be created even if those services weren't represented in the
analyzed traffic (in which case the files will be updated with zeroes.)
This was to workaround the problem in which the graphs Makefile would
fail for sites that didn't have traffic for some services, and therefore
the required ".rrd" files didn't exist for the given Makefile target.

removed some unecessary code from the "perfile" method.
This is now unnecessary because the conversion of the time-stamp in the
flow file name to time_t has been moved to the base class "perfile"
method.

(May  2)
================================================================================
RCS file: ./RCS/FlowScan.pm,v
2000-05-11 15:31:53-05
revision 1.2
added "perfile" method to this base class so that it could convert the
filename's time-stamp into a time_t for the derived-classes

added Michael R. Elkins <me@cs.hmc.edu> utility functions from mutt's
"date.c" to aid in converting time-stamp with "hours east of GMT"

(Apr 25)
================================================================================
RCS file: ./RCS/configure.in,v
2000-05-11 14:44:39-05
revision 1.3
bug fix so that configure output variables will be properly substituted
in the example crontabs
(Previously "LS_PATH" was inadvertently being replaced with the path to
"ksh" - ugh.)
(Apr 21)
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2000-05-11 14:43:21-05
revision 1.8
removed some unecessary code from the "perfile" method.
This is now unnecessary because the conversion of the time-stamp in the
flow file name to time_t has been moved to the base class "perfile"
method.
(Apr 20)
================================================================================
RCS file: ./RCS/flowscan.in,v
2000-05-11 14:40:39-05
revision 1.14
sorted the raw flow file names by the timestamp in the file name
(This is necessary to properly handle the deactivation of Daylight
Savings Time - when the same time of day will occur twice.)
(Apr 21)
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-05-11 14:34:25-05
revision 1.6
fixed the scaling factor to convert from bytes to Megabits
The previous revisions incorrectly showed the values at about 95% of what
they should have been because I used 8/(1024*1024) rather than 8/(1000*1000).
Thanks to Frank Harper <Frank.Harper@turbomeca.fr> for point this out.
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-04-24 17:45:13-05
revision 1.12
various updates including comments about building cflowd
(Apr 21)
================================================================================
RCS file: ./cf/RCS/CampusIO.cf,v
2000-04-24 15:35:50-05
revision 1.6
fixed typo in snmpwalk example
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-04-19 23:11:54-05
revision 1.11
added ftp URL for cflowd since the link from the page at the http URL was
out of date
(Apr 15)
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-04-15 13:56:30-05
revision 1.10
updated URL for cflowd after re-org of CAIDA's web site

changed cflowd references from "Cflowd" to "cflowd" to match CAIDA's refs
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-04-11 15:49:33-05
revision 1.31
Fixed MCAST_MASK (to use "240.0.0.0" rather than "255.0.0.0").
This was pointed out by Jose Dominguez <jad@network-services.uoregon.edu>.
Previously some multicast traffic (with destination addresses between
240.*.*.* and 254.*.*.*) could be missed for "MCAST.rrd".
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-04-11 08:54:57-05
revision 1.9
fixed typos

updated "Configuring Your Ciscos" with active-timeout syntax for IOS 12.0(9)
from Frank Harper <Frank.Harper@turbomeca.fr>

added comment about how to disable Napster stuff.

added tips about workaround if graphs Makefile rules fail for targets
because of missing ".rrd" files

added info about RRGrapher in "Custom Graphs" section
================================================================================
RCS file: ./RCS/README.pod,v
2000-04-11 08:47:57-05
revision 1.4
updates in preparation for 1.003 release
================================================================================
RCS file: ./RCS/TODO,v
2000-04-11 08:43:17-05
revision 1.3
added various new TODO items
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-04-11 08:16:48-05
revision 1.30
only call NapsterWanted method if there are NapsterPorts defined
Previously, if Napster options were not specified, one would get this error:
   Can't call method "subnet" on an undefined value at
   .../bin/CampusIO.pm line 322.
This was reported by Frank Harper <Frank.Harper@turbomeca.fr>.
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-03-30 12:04:43-06
revision 1.5
changed %f to %lf since graphs for folks running rrdtool-1.0.13 where
not showing the results of the GPRINT statements in the graphs.
(Apparently the RRDTOOL graph behavior changed regarding this.
Thanks to John Kristoff <jtk@depaul.edu> for finding the fix.)
================================================================================
RCS file: ./cf/RCS/CampusIO.cf,v
2000-03-30 00:08:24-06
revision 1.5
temporary change to allow user to specify the output interface (used to
identify outbound traffic) by ifIndex number.
(This was done for John Kristoff <jtk@depaul.edu>, since he has a
router config with no IP address on his outbound interface, and therefor
no next-hop IP address.)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-03-30 00:08:24-06
revision 1.29
temporary change to allow user to specify the output interface (used to
identify outbound traffic) by ifIndex number.
(This was done for John Kristoff <jtk@depaul.edu>, since he has a
router config with no IP address on his outbound interface, and therefor
no next-hop IP address.)
================================================================================
RCS file: ./RCS/VERSION,v
2000-03-21 15:36:38-06
revision 1.3
prep for next release
================================================================================
RCS file: ./RCS/Makefile.in,v
2000-03-21 14:53:22-06
revision 1.9
removed things that ship with the distribution from the "all" target.
Some of these things such as "Changes" can only be created by the
developer.  They've been moved to the "myall" target, which is not
for use by end-users.
================================================================================
RCS file: ./RCS/Makefile.in,v
2000-03-21 13:20:13-06
revision 1.8
added "spotless" target (for use by the maintainer only)

Changed dependencies for "Changes" so that it doesn't depend on itself
================================================================================
RCS file: ./RCS/Makefile.in,v
2000-03-21 13:10:39-06
revision 1.7
added removal of some files to the "realclean" target
================================================================================
RCS file: ./RCS/Makefile.in,v
2000-03-21 13:03:12-06
revision 1.6
converted README and INSTALL to POD and added targets to generate HTML
and plain text versions of those files

Fixed dependencies for Changes file
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-03-21 13:02:32-06
revision 1.8
added some more information about generating graphs
================================================================================
RCS file: ./RCS/TODO,v
2000-03-21 12:59:57-06
revision 1.2
added ASPairs problem with ':' in ".rrd" file names
================================================================================
RCS file: ./RCS/README.pod,v
2000-03-21 11:51:34-06
revision 1.3
converted to POD and added lots of stuff in preparatino for release
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-03-21 11:49:23-06
revision 1.7
various updates and reorganization in preparation for release
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-03-21 00:49:24-06
revision 1.6
converted from text to POD
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-03-21 00:48:07-06
revision 1.5
updates for release
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-03-20 17:48:19-06
revision 1.4
various update in preparation for release
================================================================================
RCS file: ./RCS/Makefile.in,v
2000-03-20 17:46:34-06
revision 1.5
added "TODO" to distfiles
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-03-20 17:45:32-06
revision 1.4
added dependency of services_* targets no NapUser.rrd
(this was erroneously left out of the previous revision)
================================================================================
RCS file: ./cf/RCS/flowscan.cf,v
2000-03-20 17:39:26-06
revision 1.2
added default specifications using relative paths to files so that it's
less work for the user to install
================================================================================
RCS file: ./cf/RCS/SubNetIO.cf,v
2000-03-20 17:38:29-06
revision 1.3
added default specifications using relative paths to files so that it's
less work for the user to install
================================================================================
RCS file: ./cf/RCS/CampusIO.cf,v
2000-03-20 17:37:59-06
revision 1.4
added default specifications using relative paths to files so that it's
less work for the user to install
================================================================================
RCS file: ./RCS/TODO,v
2000-03-20 12:48:50-06
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/graphs.mf.in,v
2000-03-20 12:36:56-06
revision 1.3
patched to add Napster stuff
================================================================================
RCS file: ./cf/RCS/our_subnets.boulder,v
2000-03-20 12:11:08-06
revision 1.3
renamed to have ".boulder" extension
================================================================================
RCS file: ./cf/RCS/Napster_subnets.boulder,v
2000-03-20 12:11:08-06
revision 1.2
renamed to have ".boulder" extension
================================================================================
RCS file: ./cf/RCS/local_nets.boulder,v
2000-03-20 12:11:08-06
revision 1.2
renamed to have ".boulder" extension
================================================================================
RCS file: ./cf/RCS/SubNetIO.cf,v
2000-03-20 12:10:13-06
revision 1.2
renamed ".bouldersubnets" files
================================================================================
RCS file: ./cf/RCS/CampusIO.cf,v
2000-03-20 12:09:22-06
revision 1.3
renamed ".bouldersubnets" files
================================================================================
RCS file: ./RCS/flowscan.in,v
2000-03-20 12:08:21-06
revision 1.13
added a timestamp to the "working on ..." message

did some line-wrapping for readability
================================================================================
RCS file: ./RCS/configure.in,v
2000-03-20 12:07:44-06
revision 1.2
added a bunch of commands that are used by the "example/crontab"
================================================================================
RCS file: ./RCS/README.pod,v
2000-03-20 12:06:33-06
revision 1.2
updated a bit in preparation for release
================================================================================
RCS file: ./RCS/Makefile.in,v
2000-03-20 12:00:25-06
revision 1.4
converted from "distdirs" to "distfiles" so that I can check things in
to RCS in sub-dirs and ",v" files won't ship with the distribution

added "locker" utility

added "MANIFEST" and "Changes" targets

added "example/crontab.in"

added Napster stuff
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-03-20 11:59:36-06
revision 1.3
updated in preparation for release
================================================================================
RCS file: ./example/RCS/crontab.in,v
2000-03-20 11:59:07-06
revision 1.1
Initial revision
================================================================================
RCS file: ./rc/solaris/RCS/cflowd,v
2000-03-20 10:55:43-06
revision 1.1
Initial revision
================================================================================
RCS file: ./rc/solaris/RCS/flowscan,v
2000-03-20 10:55:43-06
revision 1.1
Initial revision
================================================================================
RCS file: ./rc/linux/RCS/cflowd,v
2000-03-20 10:55:25-06
revision 1.1
Initial revision
================================================================================
RCS file: ./rc/linux/RCS/flowscan,v
2000-03-20 10:55:25-06
revision 1.1
Initial revision
================================================================================
RCS file: ./cf/RCS/our_subnets.boulder,v
2000-03-20 10:54:40-06
revision 1.2
fixed the subnet specifications
================================================================================
RCS file: ./cf/RCS/Napster_subnets.boulder,v
2000-03-20 10:53:25-06
revision 1.1
Initial revision
================================================================================
RCS file: ./cf/RCS/local_nets.boulder,v
2000-03-20 10:53:25-06
revision 1.1
Initial revision
================================================================================
RCS file: ./cf/RCS/our_subnets.boulder,v
2000-03-20 10:53:25-06
revision 1.1
Initial revision
================================================================================
RCS file: ./cf/RCS/flowscan.cf,v
2000-03-20 10:53:25-06
revision 1.1
Initial revision
================================================================================
RCS file: ./cf/RCS/SubNetIO.cf,v
2000-03-20 10:53:25-06
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-03-19 21:58:07-06
revision 1.28
cleaned up some comments
================================================================================
RCS file: ./RCS/README.pod,v
2000-03-10 17:28:39-06
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-03-10 17:24:47-06
revision 1.2
added Napster stuff
================================================================================
RCS file: ./RCS/INSTALL.pod,v
2000-03-10 17:17:06-06
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/CampusIO.pm,v
2000-03-10 17:15:41-06
revision 1.27
added support to track Napster I/O as "NapUser" and "NapUserMaybe"

converted "which" from a package-level variable to a class member

fixed warning message for clarity
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
2000-03-10 17:12:35-06
revision 1.7
preserved return value from SUPER::wanted so that Cflow::find will return
a proper "hit ratio" in flowscan script

Changed "which" from a package-level variable to a member of the class
(this was due to the change in CampusIO.pm)
================================================================================
RCS file: ./RCS/flowscan.in,v
2000-03-10 17:11:09-06
revision 1.12
updated wanted sub-routine so that Cflow::find returns a proper "hit ratio"
(this also caused Cflow-1.017 to be required)
================================================================================
RCS file: ./RCS/VERSION,v
2000-03-10 17:10:40-06
revision 1.2
*** empty log message ***
================================================================================
RCS file: ./cf/RCS/CampusIO.cf,v
2000-03-10 15:58:51-06
revision 1.2
added defaults for Napster

updated description of LocalNextHops
================================================================================
RCS file: ./cf/RCS/CampusIO.cf,v
2000-02-18 08:21:33-06
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/graphs.mf.in,v
1999-09-22 16:25:51-05
revision 1.2
removed graphs from "all" target that won't work for everyone
================================================================================
RCS file: ./RCS/flowscan.in,v
1999-09-22 00:36:15-05
revision 1.11
loaded config file from where script was run rather than current dir
================================================================================
RCS file: ./RCS/Makefile.in,v
1999-09-22 00:26:04-05
revision 1.3
added "cf" sub-dir to distdirs
================================================================================
RCS file: ./RCS/Makefile.in,v
1999-09-22 00:23:12-05
revision 1.2
added some distfiles
================================================================================
RCS file: ./RCS/graphs.mf.in,v
1999-09-22 00:18:35-05
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/Makefile.in,v
1999-09-22 00:18:35-05
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/configure.in,v
1999-09-22 00:18:35-05
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/flowscan.in,v
1999-09-22 00:04:07-05
revision 1.10
renamed to have ".in" extension (now that this is a "configure" output
file)

added copyright info

added configuration file stuff
(removed "hard-coded" configuration values)

added "hit ratio" info to log messages to STDERR
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
1999-09-22 00:01:29-05
revision 1.6
added configuration file stuff
(removed "hard-coded" configuration values)

used newer NetTrie/IPv4Trie API
(now that NetTrie is released)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-09-21 23:59:14-05
revision 1.26
required FlowScan to enforce that the required methods are present

added configuration file stuff
(removed "hard-coded" configuration values)
================================================================================
RCS file: ./RCS/VERSION,v
1999-09-21 10:06:41-05
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
1999-09-21 08:41:02-05
revision 1.5
allowed configurable $SubNetIO::outputdir to be a relative path
(Sep 10)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-09-21 08:39:08-05
revision 1.25
allowed configurable $CampusIO::outputdir to be a relative path
(Sep 10)
================================================================================
RCS file: ./RCS/flowscan.in,v
1999-09-21 08:38:02-05
revision 1.9
improved the default file name glob
(Sep 14)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-09-10 14:12:22-05
revision 1.24
I'd rather *die* than to attempt to call and undefined subroutine!
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-09-10 14:04:42-05
revision 1.23
added "pim" (Protocol-Independent Multicast) to set of IP protocols for
which we collect statistics
(Aug 31)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-08-31 11:09:42-05
revision 1.22
added monitoring of Quake 3 traffic
(Aug 25)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-08-25 16:15:44-05
revision 1.21
updated ESnet next-hop (info from Naz)
This was done a while ago...
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-08-05 15:19:51-05
revision 1.20
added AS # for TDS
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-08-03 17:45:35-05
revision 1.19
added next-hop and AS info for Berbee, Chorus, TDS, and ESnet
(note that the AS # for TDS is still missing and should be added ASAP)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-07-28 15:55:04-05
revision 1.18
used package-level variables rather than "use constant" to make things
faster.  Using DProf/dprofpp I discovered that the resultant calls to
routines in the constant package accounted for a significant amount of
the CPU used by my flowscan script.
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
1999-07-28 15:52:56-05
revision 1.4
added "if (1)" stuff so that I can easily change this script for debugging
by writing output to "/tmp/..."
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-07-28 09:09:31-05
revision 1.17
Added support for multicast traffic
(Jun  2)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-05-26 14:09:06-05
revision 1.16
specified additional arguments to mktime(3) so that daylight-savings-time
would be taken into account
(Apr  9)
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
1999-05-26 14:01:30-05
revision 1.3
called CampusIO::_init to initialize object

specified additional arguments to mktime(3) so that daylight-savings-time
would be taken into account
(Apr  9)
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
1999-04-08 23:57:59-05
revision 1.2
used new NetTrie class (rather than older "NetTree") because it's faster

The previous revision just plain didn't work, BTW.
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-04-08 23:53:45-05
revision 1.15
used mktime rather than timelocal

made "$which" a public variable so that it could be referred to by
"wanted" subroutines of derived classes

returned a useful value from "wanted" so that derived classes could
determine whether or not this flow represented Campus I/O or not.

made sure that values for DSes were numeric (not the null string)
when updating RRD files
================================================================================
RCS file: ./RCS/SubNetIO.pm,v
1999-04-08 22:16:19-05
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/Denied.pm,v
1999-04-08 13:45:18-05
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-04-08 13:41:08-05
revision 1.14
added code to track "AS to AS" traffic for Campus, vBNS, and WiscNet

skipped traffic that did not have an output interface.  This would
include traffic that we block using access control lists.
(Previously this outbound traffic was erroneously counted in the
totals.)

improved "createRRD" subroutine so that you can create ".rrd" files
that don't count in and out traffic.
================================================================================
RCS file: ./RCS/flowscan.in,v
1999-04-08 11:41:51-05
revision 1.8
added "-g" option so that caller can specify where to glob for flow
files (This is especially useful to test a change to a FlowScan report
from a different directory while the "production" flowscan is running.)
(Apr  5)
================================================================================
RCS file: ./RCS/flowscan.in,v
1999-04-05 15:34:10-05
revision 1.7
move files into "saved" sub-dir (if it exists) after processing raw flow
files
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-03-26 16:29:27-06
revision 1.13
added protocol stuff ('icmp', 'tcp', 'udp')
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-03-26 15:45:08-06
revision 1.12
turned verbose on to cause it to print stats on %CampusIO::RealServer
(This will help to determine how often to trim or flush this cache)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-03-26 14:53:37-06
revision 1.11
added RealAudio stuff
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-03-24 15:10:28-06
revision 1.10
skip the flow if $nexthop is zero - I think this will eliminate flows that
are going nowhere (not routable) and also those destined for the web cache
via the WCCP GRE tunnel
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-03-24 15:05:02-06
revision 1.9
made major changes having to do with the RRD stuff to add the "pkts"
and "flows" statistics to the RRDs
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-03-24 10:16:57-06
revision 1.8
update vBNS next-hop (info from Naz)

removed dead code having to do with the web cache

changed the "heartbeat" for the RRD files from 300 to 400 to handle
variations in the sample step interval
(previously the ".rrd" file generation was broken because of this)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-03-23 16:08:25-06
revision 1.7
added initial RRD stuff
(this doesn't work quite right yet so the MRTG rateup stuff is still being
used as well.)
================================================================================
RCS file: ./RCS/flowscan.in,v
1999-03-21 16:59:42-06
revision 1.6
required Cflow 1.015
================================================================================
RCS file: ./RCS/flowscan.in,v
1999-03-19 14:16:10-06
revision 1.5
converted to using cflowd-2.x with my patch to write a flow file after
a period of time passes.  (The file named changed here.)

Fixed a bug that was causing the report objects to not be destroyed
after each indifidual flow file was processed, when the glob matched
more than one file.  (This was periodically wreaking havoc with
the CampusIO report.)
(Mar 18)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-03-19 14:14:59-06
revision 1.6
converted to using newer Cflow package that works with cflowd-2.x.

began adding stuff to skip traffic for web caches.  (This is not yet
complete.)
(Mar 17)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-02-15 09:17:33-06
revision 1.5
added new WiscNet next-hop (info from Naz)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-02-12 11:07:26-06
revision 1.4
commented out the code that initializes "@CampusIO::localhops" because
this is unnecessary now that there is only one "border" router
(i.e. we don't need to skip traffic destined for another "border/peer"
router because there is only one.)
================================================================================
RCS file: ./RCS/flowscan.in,v
1999-02-12 11:06:00-06
revision 1.4
removed the stuff that looks for "$otherfile" since we have changed to
exporting from just one "peer" router now
================================================================================
RCS file: ./RCS/flowscan.in,v
1999-02-12 10:53:37-06
revision 1.3
kept track of total size of flow files and included this info in the
"warnings" if $opt_v
(Jan  4)
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1999-02-10 16:18:31-06
revision 1.3
specified absolute path to "local.bouldersubnets" file so that we can
run this as another user
================================================================================
RCS file: ./RCS/FlowScan.pm,v
1999-01-04 13:49:46-06
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/flowscan.in,v
1999-01-04 13:48:19-06
revision 1.2
added @ARGV to STDERR "warnings" printed when "-v" is used
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1998-12-21 16:12:06-06
revision 1.2
added destructor to zero the counters in each element of @CampusIO::subnets.
In the previous revision these totals where erroneously being accumulated
without bound, and causing the rateup-created log files and GIFs to be
screwed up for subnets.
================================================================================
RCS file: ./RCS/Abuse.pm,v
1998-12-21 16:10:56-06
revision 1.2
send e-mail if any lines are written to "report.txt"
================================================================================
RCS file: ./RCS/flowscan.in,v
1998-12-18 15:24:59-06
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/Abuse.pm,v
1998-12-18 15:24:59-06
revision 1.1
Initial revision
================================================================================
RCS file: ./RCS/CampusIO.pm,v
1998-12-18 15:24:59-06
revision 1.1
Initial revision
================================================================================
